Pool Power pH–Min is een pH verlager in granulaatvorm. De benodigde hoeveelheid oplossen in een kunststof emmer met water en vervolgens gelijkmatig over het wateroppervlak verdelen, bijvoorbeeld met een gieter.

With the pH minus from Aquaforte you lower the pH value of your water. A good pH value is important to keep and get a good water quality. The Aquaforte pH Minus consists of a powder that is rapidly absorbed by the water. Features AquaForte pH Minus | 1.5kg capacity: 1500gram fast dissolving lowers your pH value quickly and effectively

Winterization Extra - 5L User Manual: Winterization: perform a chlorochoc and wait at least 24 hours and the water temperature drops below 15°C. Add 5 L of overwintering product per 60 m³ of pool water. Spread it over the water surface and run the filtration system for a few more hours. Then bring water under the skimmers, empty the pipes and apply gizmos and winterstops. Place winter floats on...

Directions for use: PRIVATE SWIMMING POOLS: Add Liquid pH MIN directly into the pool before the weir(s), filtration in operation. ABSOLUTELY no swimmers should be present. PUBLIC SWIMMING POOLS: Liquid pH MIN should be injected undiluted directly by the dosing pump from the bottle or through a filler tank.

Melpool pH min, 7 kilo Dosage: about 80 grams per 10 m3 of water reduces the pH value by about 0.1. The recommendation is to maintain pH between 7.2 and 7.4.

Pool Power pH-Min is a pH reducer in granular form. Dissolve the required amount in a plastic bucket with water and then distribute evenly over the water surface, for example with a watering can.

pH Minus Liquid reduces pH levels. Ideal for use in conjunction with a dosing pump. Ideal value: 7.2 - 7.6. Dosage: 325 ml reduces pH by 0.2 at 10m³ water volume.

For lowering the pH value of swimming water. Depending on the hardness of the water, 4-10 grams per m3 lowers the pH value by 0.1.

Interline PH-Min Granulate 1kg

Instructions for use: Ideal pH value 7.0 - 7.4. 150 g granulate is sufficient to increase the pH value of 10 m³, pool water by 0.1 to 0.2 : for hard water more, for soft water less product is needed. Dissolve the granulate in a bucket of water and add it to the pool water. If pH is low, dose the product in several doses and retest the pH after each addition after about 12 h before...

Pool power Ph Plus increase pH Pool Power Ph Plus is a pH increase agent. Helps maintain pH levels between 7.2 and 7.6. Specifications: Contents: 5 kilos Helps maintain pH levels between 7.2 and 7.6 Packaging material: plastic

Ideal pH value 7.0 - 7.4. 150 g granulate is sufficient to lower the pH value of 10 m³, pool water by 0.1 to 0.2 : with hard water more, with soft water less product is needed. Dissolve the granulate in a bucket of water and add it to the pool water. If pH is high, dose the product in several doses and retest the pH after each addition after about 12 h before dosing again. Do not pour near...